Billet Aluminum Turbocharger Coolant Line Fittings for Mercedes M278 and M157 Engines

from $319.00

Fix It For Good, The Easy Way

Enjoy peace of mind by permanently fixing those crack-prone turbo coolant lines on your M278 or M157 engine with these billet aluminum upgrade fittings, whilst also enjoying an easier installation process! Replacing these lines the conventional way is very difficult due to lack of access to the driver (left) side fitting bolt on the turbocharger.

Please see product details below for which OEM parts each kit replaces, if in doubt, please contact me using the form to verify fit.

NOTE: GL550/GL450/GLS550/ML550 cars with the M278 use fitting an additional fitting (P/N 2782001000) which is not available in this kit, but available in full-aluminum construction from Rein (P/N CHU0719) which I recommend be purchased separately from a reputable distributor.

Pick Style:

Fix It For Good, The Easy Way

Enjoy peace of mind by permanently fixing those crack-prone turbo coolant lines on your M278 or M157 engine with these billet aluminum upgrade fittings, whilst also enjoying an easier installation process! Replacing these lines the conventional way is very difficult due to lack of access to the driver (left) side fitting bolt on the turbocharger.

Please see product details below for which OEM parts each kit replaces, if in doubt, please contact me using the form to verify fit.

NOTE: GL550/GL450/GLS550/ML550 cars with the M278 use fitting an additional fitting (P/N 2782001000) which is not available in this kit, but available in full-aluminum construction from Rein (P/N CHU0719) which I recommend be purchased separately from a reputable distributor.

Only one of the following kits will fit your car, check your vehicle’s engine or contact me to determine the correct style. Buyer subject to postage fees if returning due to wrong style purchased.

  • Style A - M157/M278 (Fits Both)

  • Style B - M278 Specific (E.g. E550, S550, CLS550, CL550, etc)

  • Style B - M278 SUVs Only (E.g. GL450, GL550, ML550, etc)

  • Style B - M157 Specific (E.g. E63, S63, GL63, ML63, SL63, CLS63, etc)

Kit Includes:

Style A - Early-Gen M278/M157’s Only! (2012 to Early 2013, Send VIN to verify)

  • Universal Left Feed Fitting + Hose (Replaces OEM P/Ns: 2782000900, 2782000051, 2782000300)

  • Style A Left Return Fitting + Hose (Replaces OEM P/Ns: 2782001100. 2782000851)

  • Style A Right Return Fitting + Hose (Replaces OEM P/Ns: 2782000851)

  • Hose Clamps Needed

  • Installation instructions via link to video (QR Code)

Style B - M278 Specific:

  • Universal Left Feed Fitting + Hose (Replaces OEM P/Ns: 2782000900, 2782000051, 2782000300)

  • Style B Left Return Fitting + Hose (Replaces OEM P/Ns: 2782001300, 2782000200, 2782001751)

  • M278 Right Return Fitting + Hose (Replaces OEM P/Ns: 2782001400, 2782000100, 2782001351)

  • Hose Clamps Needed

  • 2X O-Rings to Refresh Old Line (Part That Inserts Into New Part)

  • Installation instructions via link to video (QR Code)

Style B - M157 Specific:

  • Universal Left Feed Fitting + Hose (Replaces OEM P/Ns: 2782000900, 2782000051, 2782000300)

  • Style B Left Return Fitting + Hose (Replaces OEM P/Ns: 2782001300, 2782000200, 2782001751)

  • M157 Right Return Fitting + Hose (Replaces OEM P/Ns: 1572000000, 1572000151, 1572000051)

  • Hose Clamps Needed

  • 2X Long M6 x 40mm Screws

  • 2X O-Rings to Refresh Old Line (Part That Inserts Into New Part)

  • Installation instructions via link to video (QR Code)


DISCLAIMER: This kit is designed to make replacement easy by only replacing the section of coolant line known to fail. This allows the section not known to fail to stay in place. Therefore, please understand that this kit works by modifying the existing line-set, rather than replacing the entire piece. By purchasing this product, the buyer acknowledges that the buyer is responsible for proper installation and subsequent inspection of the product and vehicle. Sheer Performance LLC has done its due diligence in meeting or exceeding OEM products and is not responsible for any damages caused to the buyer’s vehicle due to negligent use or improper installation.

Cart

Installation video as shown on an M278 engine that calls for Style A fittings

Material:

6061-T6 Aluminum Alloy


Warranty:

5 Years against failure of the aluminum fitting and rubber hose (O-rings excluded). O-rings used on this product are identical to those found on OEM Mercedes lines, and can be purchased from me or Mercedes if replacement is needed. In case of hose failure out of warranty, hoses can be replaced with 5/16 ID heater coolant hose.